Strike Industries Enhanced AR-10 Lower Parts Kit Builders Kit | SI-AR10-E-LRPLT

$59.95
No reviews yet Write Review Ask Questions

Strike Industries Enhanced AR-10 Lower Parts Kit Builders Kit | SI-AR10-E-LRPLT

  • SKU: TGU-SI-AR10-E-LRPLT
  • UPC: 793811765953
  • MPN: SI-AR10-E-LRPLT
  • Availability: Usually Ships in 24 Hours
Availability: Usually Ships in 24 Hours
In Stock & Ready To Ship!
Current Stock: Only left: 0

More available for backorder

Description

Product Overview

Upgrade your large-frame precision rifle build right from the foundation with the Strike Industries Enhanced AR-10 Lower Parts Kit (Builders Kit) (SKU: SI-AR10-E-LRPLT). Tailored specifically for DPMS/LR-308 and SR-25 pattern lower receivers, this purpose-built kit provides builders with Strike Industries' signature ergonomic control upgrades at an unbeatable value without forcing you to pay for basic factory grips or standard Mil-Spec fire control groups you plan to replace anyway.

Equipped with Strike's enlarged AR-10 Enhanced Bolt Catch, textured Magazine Catch assembly, Extended Pivot and Takedown Pins, and modular 60/90-degree HEX Selector Switch system, this Builders Kit delivers faster manipulation, improved grip traction, and tool-free field disassembly. For builders looking to refresh an existing fire control unit, full replacement trigger, hammer, and disconnector springs plus hammer/trigger pins are still thoughtfully included in the package.

PLATFORM FITMENT & COMPATIBILITY NOTES:

  • Compatible With: DPMS Gen 1 / LR-308 and Knight's Armament SR-25 pattern lower receivers. Newer-generation Aero Precision M5 lowers generally exhibit tighter rear takedown pin fitment compared to older-generation M5 runs due to manufacturing tolerances.
  • NOT Compatible With: ArmaLite AR-10 pattern lowers, select non-standard billet lowers, or standard AR-15 receivers (AR-10 bolt catch, roll pin, pivot pin, and takedown pin are oversized for large-frame platforms).
  • PDW Stock Notice: Extended pivot and takedown pins may bind or interfere with the side slide rods on compact PDW stocks and PDW pistol stabilizers.

Key Features

  • Custom Builder-Focused Configuration: Omits the pistol grip and fire control components (hammer/trigger/disconnector), letting you install your preferred aftermarket match trigger and grip without wasted parts.
  • Strike AR-10 Enhanced Bolt Catch: Features aggressive surface texturing and wider, angled paddles for positive lock-back and rapid bolt release—even while wearing heavy tactical gloves.
  • HEX 60/90-Degree 3-in-1 Selector Switch: Modular ambidextrous safety system lets you choose between a rapid 60-degree short throw or traditional 90-degree throw, complete with two levers and an end-cap option.
  • SI Extended Pivot & Takedown Pins: Contoured, extended-grip pin heads enable effortless finger-pull receiver separation without needing punches or tools.
  • Strike Magazine Catch Assembly: Includes the Strike Magazine Catch and grooved magazine release button for positive indexing and crisp magazine drops.
  • Bonus Fire Control Springs & Pins: Includes replacement hammer, trigger, and disconnector springs plus solid steel hammer and trigger pins in case you wish to refresh an existing trigger group.

Complete Package Contents (28 Pieces)

SI Enhanced Components (11 pcs)

  • (1) Strike AR-10 Enhanced Bolt Catch
  • (1) Strike Magazine Catch
  • (1) Strike Magazine Catch Button
  • (1) SI Extended Pivot Pin
  • (1) SI Extended Takedown Pin
  • (2) HEX Selector Switch Levers
  • (1) HEX Selector Switch End Cap
  • (1) HEX Selector 60/90° Shaft
  • (2) HEX Selector Mounting Screws

Springs (9 pcs)

  • (1) Bolt Catch Spring
  • (1) Magazine Catch Spring
  • (2) Pivot & Takedown Detent Springs
  • (1) Selector Detent Spring
  • (1) Buffer Retainer Spring
  • (1) Hammer Spring
  • (1) Trigger Spring
  • (1) Disconnector Spring (Tapered)

Pins, Detents & Retainers (8 pcs)

  • (1) Bolt Catch Plunger
  • (1) Bolt Catch Roll Pin
  • (2) Pivot & Takedown Detents
  • (1) Selector Detent
  • (1) Buffer Retainer
  • (1) Hammer Pin
  • (1) Trigger Pin

Specifications

Brand / Manufacturer Strike Industries
Product Name Enhanced AR-10 Lower Parts Kit (Builders Kit)
Manufacturer Part # (SKU) SI-AR10-E-LRPLT
Platform Compatibility DPMS / LR-308, SR-25, & Aero Precision M5 Lower Receivers
Incompatible Platforms ArmaLite AR-10, Standard AR-15, Non-Standard Billet Lowers
Safety Selector Throw Configurable 60° Short-Throw or 90° Standard Throw (Ambidextrous / End-Cap)
Finish / Color Matte Black
Included FCG Components Hammer, Trigger & Disconnector Springs + Hammer/Trigger Pins (Trigger/Hammer/Grip Not Included)

CALIFORNIA PROPOSITION 65 WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.

Frequently Asked Questions

What additional parts do I need to complete my lower receiver with this Builders Kit?
Because this is a Builders Kit, you will need to supply your own Fire Control Group (hammer, trigger, and disconnector—or a self-contained drop-in trigger cassette), a pistol grip (a standard AR-15 grip fits DPMS/SR-25 pattern lowers), and your chosen buffer tube / stock assembly.
Will this kit fit an Aero Precision M5 (.308) lower receiver?
Yes, Aero Precision M5 lowers follow the DPMS pattern. Note that due to minor generational tolerance variations in M5 receivers, newer-generation M5 lowers tend to exhibit an even snugger fit on the rear takedown pin compared to earlier-generation runs.
Can I use any of these parts on a standard AR-15 lower receiver?
No. Large-frame AR-10 / LR-308 lowers have wider receiver walls and larger bolt dimensions. The bolt catch, bolt catch roll pin, pivot pin, and takedown pin are specifically sized for AR-10 receivers and will not fit standard AR-15 frames.
How do I switch the HEX Selector between 60-degree and 90-degree throw?
The Strike HEX Selector shaft is dual-machined with both 60-degree and 90-degree detent channels. Simply rotate the central shaft 180 degrees during installation to align your desired throw angle with the selector detent, then attach the lever arms or end cap with the included screws.

Frequently Bought Together:

Total:
Inc. Tax
Ex. Tax