-
Cryptic Coatings .308 Win AR-10 Bolt Carrier Group Black Nitride | DPMS LR-308
Inc. TaxInc. TaxMSRP: Inc. Tax$179.99MSRP: $209.50 -
Faxon Firearms Mid-Length Gas Tube for AR-15 and AR-10/LR-308 Systems
Inc. TaxInc. TaxMSRP: Inc. Tax$15.99MSRP:Faxon Firearms Mid-Length Gas Tube for AR-15 and AR-10 Upgrade your AR-15 or AR-10 build with the Faxon Firearms Mid-Length Gas Tube. Engineered for reliability and durability, this mid-length gas... -
Strike Industries Ultimate Dust Cover, Fits AR-10 in 308, Black SI-AR-UDC-E-308-01-BK
Inc. TaxInc. TaxMSRP: Inc. Tax$15.95MSRP: $16.95SKU: SI-AR-UDC-E-308-01-BK The SI UDC 308 enables users to attach and detach the cover in 5 to 10 seconds with ease (stock dust cover will take more time to remove)! It is constructed of a... -
Phase 5 Tactical Extended Bolt Release V2-308 DPMS LR-308
Inc. TaxInc. TaxMSRP: Inc. Tax$59.99MSRP: -
CMMG MK3 308 Takedown and Pivot Pins - Extended and Dimpled - in Black
Inc. TaxInc. TaxMSRP: Inc. Tax$24.95MSRP:Product SKU: CMMG38AFF31 Streamline your firearm maintenance with these enhanced takedown pins. Engineered for superior performance, these pins are precision-machined to be slightly longer,... -
Duramag 10rd 308/6.8X51 SS Black
Inc. TaxInc. TaxMSRP: Inc. Tax$33.90MSRP:For demanding calibers, only the most robust magazines will suffice. Introducing the DURAMAG SS, engineered for the SR25 pattern and built to endure. Crafted from a single piece of laser-welded...
Description
Product Overview
Upgrade your large-frame precision rifle with effortless field-stripping ergonomics and receiver-protecting engineering using the Battle Arms Development Enhanced Pin Set (BAD-EPS-308) for LR-308 / SR-25 / AR-308 Rifles in Matte Black. Precision CNC-machined from high-grade steel and finished in a resilient black protective coating, this complete receiver pin set replaces standard flat, hard-to-grasp factory pins with low-profile, contoured pin heads featuring vastly improved gripping surfaces.
Thoughtfully engineered to clear right-side ambidextrous safety selector levers without interference, both the pivot pin and takedown pin incorporate slightly extended pin tips with patented cone-shaped recesses. These self-centering bullet-tip pockets prevent punches, cartridges, or cleaning tools from slipping off the pin end—eliminating accidental scratches and gouges to your lower receiver finish. Complete with two precision-ground KNS Precision stainless steel detents and two detent springs, the BAD-EPS-308 delivers smooth, snag-free performance for any DPMS LR-308 or SR-25 build.
PLATFORM COMPATIBILITY NOTICE: Engineered specifically for large-frame DPMS LR-308, SR-25, Aero Precision M5, and standard AR-308 pattern lower receivers (0.277"–0.281" large-frame pin diameter). Not compatible with standard small-frame AR-15 / M4 lowers (0.250"), ArmaLite AR-10 receivers, or DPMS Gen 2 (GII) platforms.
Key Features
- Improved Gripping Surface & Low-Profile Heads: Precision-textured pin heads (dimpled takedown pin and knurled pivot pin) offer positive fingertip traction for rapid pulling while maintaining a sleek, low-drag profile that will not snag on slings or gear.
- Ambidextrous Safety Compatible: Low-profile rear takedown pin head geometry provides full clearance for right-side ambidextrous safety levers in both 45-degree and 90-degree throw configurations.
- Cone-Shaped Bullet-Tip Recesses: Deeply machined conical recesses on both pin tips center bullet tips or punches securely, preventing tool slip and protecting your receiver anodizing or Cerakote finish from scratches.
- Extended Pin Tips: Slightly extended tips sit proud of the receiver wall for easier initial push-out without adding snag hazards.
- EZ-Install Pivot Pin Guide Hole: Features Battle Arms' signature cross-drilled installation hole on the pivot pin shaft to simplify detent and spring assembly without launching small parts.
- Includes KNS Precision Detents & Springs: Ships complete with two (2) precision-turned KNS stainless steel detents and two (2) high-tensile detent springs for crisp, consistent engagement.
Specifications & Package Contents
| Brand / Manufacturer | Battle Arms Development (BAD) |
|---|---|
| Product Model | Enhanced Pin Set — Large Frame (BAD-EPS-308) |
| Platform Compatibility | LR-308 / SR-25 / AR-308 / Aero Precision M5 Pattern Lower Receivers |
| Material & Finish | Precision CNC-Machined Steel / Matte Black Protective Finish |
| Pin Tip Design | Slightly Extended Tips with Self-Centering Cone-Shaped Recesses |
| Ambi Safety Clearance | Yes — Full Clearance for Right-Side Ambidextrous Selector Levers |
| Included Components | (1) Enhanced Takedown Pin, (1) Enhanced Pivot Pin, (2) KNS Precision Detents, (2) Detent Springs |
| Country of Origin | United States of America |
Frequently Asked Questions
How does the cone-shaped recess on the pin tips protect my rifle?
Standard factory pins have flat or slightly domed tips that allow a bullet tip or metal punch to easily slide off and gouge the side of your lower receiver. Battle Arms Development machines a concave conical cup into the tip of both pins, capturing the bullet tip or tool point squarely in the center as you push the pin out.
Will this pin set fit an Aero Precision M5 (.308) or SR-25 lower receiver?
Yes. The BAD-EPS-308 is dimensioned for DPMS LR-308, SR-25, and Aero Precision M5 large-frame lower receivers. It will not fit standard AR-15 lowers or ArmaLite AR-10 receivers.
Does the rear takedown pin block an ambidextrous safety selector lever?
No. Unlike oversized extended pins that protrude far from the receiver and collide with right-side safety levers, Battle Arms Development keeps the pin heads low-profile so ambidextrous selectors rotate freely without obstruction.
What is the purpose of the small hole near the tip of the pivot pin?
That cross-drilled hole is an EZ-install alignment port. It allows you to retain the pivot pin detent and spring using a small pin or Allen key while sliding the pivot pin smoothly into the receiver lugs—preventing the detent from shooting across the room during assembly.