-
DPM Recoil Reduction Spring Kit - Sig P320 M18 CALI - SOFT
$111.59MSRP: $122.39DPM Mechanical Recoil Reduction System for SIG P320 M18 California Compatible Models Improve the control, reliability, and longevity of your SIG P320 platform with the DPM Mechanical Recoil... -
DPM Recoil Reduction Spring Kit - Sig P320-XTEN
$131.99MSRP: $143.99DPM Mechanical Recoil Reduction System for Sig Sauer P320-XTEN 10mm – 5" Barrel Specifically engineered for high-powered calibers, the DPM Mechanical Recoil Reduction System for the Sig Sauer... -
- 14%- 14%DPM Recoil Reduction System for Sig Sauer P365 Fuse 4.3"
$119.97$129.99MSRP: $139.99DPM Mechanical Recoil Reduction System for SIG P365-FUSE 4.3" - 18 Adjustable Settings Engineered for performance shooters and concealed carry enthusiasts, the DPM Mechanical Recoil Reduction System... -
DPM Sig Sauer P365 3.1" - Soft Version for Comps & Silencers Mods
$99.97MSRP: $134.99DPM Mechanical Recoil Reduction System for SIG P365 3.1" – Optimized for Compensators & Suppressors Experience smoother shooting and enhanced control with the DPM Mechanical Recoil Reduction... -
Description
DPM Mechanical Recoil Reduction System | SIG P320 M18 (California Standard Version)
Overview: The DPM Mechanical Recoil Reduction System for the SIG P320 M18 (California — Standard Version) is a direct-replacement captured recoil rod designed to reduce felt recoil, protect slide/frame components, and improve follow-up shot speed. This kit requires the included spring plug to be installed for correct operation and is backed by DPM’s lifetime warranty.
Compatibility
- Fits: SIG P320 M18 — California (Standard Version).
- Fitment note: Drop-in replacement for the factory guide/recoil rod; no permanent modifications required when used with compatible pistols.
What’s Included
- Captured DPM recoil rod (direct replacement)
- Spring plug (must always be installed)
- Multiple springs (short / medium / long) for tuning — see power rates below
- Installation instructions and lifetime warranty information
Important Notice
Always install the included spring plug. The spring plug is mandatory when using the DPM rod and springs; omitting it may cause improper function or damage.
Power Rates (Slide in Battery — Closed)
- Short spring: 3.5 kg / 7.71 lbs
- Medium spring: 3.8 kg / 8.37 lbs
- Long spring: 4.1 kg / 9.03 lbs
- Slide full open (total buffer force): 7.5 kg / 16.53 lbs (approx.)
Key Benefits
- Reduced felt recoil for faster sight recovery and improved shot-to-shot control.
- Smoother follow-up shots and improved firing speed.
- Slide & frame protection — buffered travel minimizes impact at full extension.
- Customizable tuning — choose short / medium / long springs to match ammunition and accessories.
- Lifetime warranty included for manufacturing defects.
Installation & Tuning Tips
- Always make the firearm safe and unloaded before installing.
- Install the supplied spring plug before test firing — it is mandatory for correct function.
- Begin testing with the medium spring; move to short (softer) or long (stiffer) spring based on recoil feel and reliability with your ammunition.
- After changes (ammo type, compensator, threaded barrel, etc.), confirm function with multiple test rounds and consult DPM or a qualified gunsmith if needed.
Technical Summary
- Product Type: Mechanical recoil reduction system (captured rod)
- Compatible Models: SIG P320 M18 (California — Standard Version)
- Adjustability: Short / Medium / Long spring selections; spring plug required
- Closed Force Range (per spring): ~7.71–9.03 lbs
- Full-Open Buffer Force: ~16.53 lbs (approx.)
- Origin: DPM — Made in Greece / EU
- Warranty: Lifetime
For special configurations (suppressors, compensators, non-standard ammo or slide modifications), contact DPM or a qualified gunsmith to determine the optimal spring/plug setup for reliability and safety.