Canik METE SFT 4.46" Barrel 9mm

DPM Mechanical Recoil Reduction System | Canik METE SFT 4.46" Barrel (9mm)

Overview: Upgrade your Canik METE SFT (4.46" barrel) with the DPM Mechanical Recoil Reduction System — a drop-in, multi-spring recoil rod engineered to smooth slide travel, reduce felt recoil, and protect slide & frame. Tunable springs and dual plugs let you match the system to compensators, suppressors, or low-power ammo for optimal performance.

Compatibility

• Canik METE SFT — 4.46" barrel, 9mm

What’s Included

• 1 × DPM recoil reduction rod (drop-in replacement)
• 5 × external springs (2 × 1.05 mm long-set, 3 × 1.10 mm short-set)
• 2 × spring plugs (1 silver, 1 black oxide coated)
• Installation instructions

How It Works

The DPM system uses an intricate, multi-spring rod (three nested springs) that progressively absorbs and cushions slide movement. The internal spring controls final travel so the slide never slams into the frame. External springs and plugs let you tune forces at slide-closed (battery) and slide-full-open positions.

Power Rates — Slide on the Battery (Closed)

Soft Springs — 1.05 mm (long set)

• Short spring: 3.5 kg / 7.7 lbs
• Long spring: 3.9 kg / 8.6 lbs

Standard Springs — 1.10 mm (short set)

• Short spring: 4.0 kg / 8.8 lbs
• Medium spring: 4.4 kg / 9.7 lbs
• Long spring: 4.7 kg / 10.3 lbs

Total Force — Slide Full Open Position

• Silver plug: ~14 lbs (approx.)
• Black (black-oxide) plug: ~18 lbs (approx.)

Key Benefits

• Faster follow-up shots — reduced recoil impulse and quicker sight recovery.
• Significant recoil reduction — smoother, more controllable shooting.
• Slide & frame protection — progressive buffering prevents hard impacts at full travel.
• Adjustable/tuneable — five external springs + two plugs for precise setup with comps, suppressors, or light ammo.
• Improved reliability — reduces certain jams and helps consistent cycling.
• Lifetime warranty — supported by the manufacturer.

Installation & Tuning Notes

• Always clear the firearm and follow safe-gun handling before installation.
• Install the included spring plug when using the DPM rod and springs — omission can cause improper function.
• Start with a conservative spring/plug combo and test-fire to determine ideal tuning for your ammo and any muzzle devices.
• If you use compensators, ported slides, or suppressors, try the softer 1.05 mm springs first and verify function.

Technical Summary

• Fit: Canik METE SFT — 4.46" barrel (9mm)
• Type: Mechanical recoil reduction / multi-spring recoil rod (drop-in)
• Included tuning parts: 5 external springs (1.05 & 1.10 mm sets), 2 spring plugs (silver & black)
• Slide-closed forces: 7.7–10.3 lbs (depending on spring)
• Full-open buffer: ~14–18 lbs depending on chosen plug
• Origin: Made in Greece — EU
• Warranty: Lifetime (manufacturer)

Note: DPM periodically updates designs (spring sets, plugs, washers, etc.). Always inspect supplied components and follow the provided installation and safety instructions.