Description

Product Overview

Upgrade your concealed carry and tactical performance with the DPM Telescopic Recoil Reduction System for Canik METE MC9 3.18" & MC9L / TAC 3.8" / Prime Radian. Engineered to replace your factory guide rod, this mechanical recoil system uses an intricate 3-spring multi-rod design to fundamentally transform your pistol's cycling dynamics, dampening felt recoil and curbing muzzle flip.

The internal third spring contained within the telescopic rod acts as a heavy-duty mechanical buffer, progressively slowing the slide so it never slams violently against the frame. Included with three distinct external springs (Short, Medium Gold, Long), this system allows shooters to custom-tune idle battery tension and full-open resistance according to ammo power factor for flawless reliability and rapid sight recovery.

Mandatory Installation & Compatibility Notice: The included washer must ALWAYS be installed when using the DPM Telescopic System. Please note that this system is not compatible with aftermarket magazine extensions or Long Stroke (LS) models.

Key Features

Telescopic Multi-Spring Technology: Intricate 3-spring rod system buffers slide velocity to prevent violent frame battering.
Customizable Power Rates: Includes 3 interchangeable external springs (Short, Medium Gold, Long) for tailored slide cycling and battery pressure.
Significant Recoil & Flip Reduction: Softens felt recoil impulse to keep sights flat for faster follow-up shots and tighter double-tap groupings.
Slide & Frame Protection: Eliminates hard impact wear at full slide opening, significantly extending firearm service life.
Jam Elimination & Control: Optimizes slide return momentum to ensure reliable feeding and battery lockup.
Manufacturer Lifetime Warranty: Precision-engineered in Greece (EU) and backed by a comprehensive lifetime warranty.

Specifications

Brand / Manufacturer	DPM Systems Technologies
System Type	Telescopic Multi-Spring Recoil Reduction System
Firearm Compatibility	Canik METE MC9 (3.18" Barrel), MC9L, TAC (3.8" Barrel), & Prime Radian (NOT LS Models)
Short Spring Forces	In Battery (Idle): 10 lbs \| Full Open: ~16 lbs
Medium Spring (Gold) Forces	In Battery (Idle): 11 lbs \| Full Open: ~18 lbs
Long Spring Forces	In Battery (Idle): 12 lbs \| Full Open: ~20 lbs
Magazine Extension Restriction	Incompatible with Aftermarket Magazine Extensions
Warranty	Manufacturer Lifetime Warranty

Frequently Asked Questions

Why is the included washer mandatory during installation?

The washer acts as a critical interface spacer between the DPM telescopic guide rod assembly and the slide/frame housing. Operating the system without the washer installed can cause mechanical binding or improper spring engagement.

How do I select the right external spring for my Canik METE MC9?

Start with the Medium (Gold) spring for standard factory target ammunition. If you experience cycling sluggishness or want a lighter slide racking feel, switch to the Short spring (10/16 lbs). For hotter defensive +P loads or compensator setups, use the Long spring (12/20 lbs) for maximum buffering.

Is this system compatible with aftermarket magazine extensions?

No, DPM specifies that this telescopic system is not compatible with aftermarket magazine extensions on the Canik METE MC9 series due to altered slide velocity dynamics and magazine spring tension variations.

Will this system fit Canik METE LS (Long Stroke) models?

No, this unit is engineered specifically for the standard MC9, MC9L, TAC 3.8", and Prime Radian models. It does NOT fit Long Stroke (LS) configurations.

Reviews (0)