-
DPM Recoil Spring Kit - Glock 43 - 43X - 48 SOFT VERSION
$103.99MSRP: $107.99DPM Mechanical Recoil Reduction System for Glock 43 / 43X / 48 – Soft Version Also Compatible for:  Shadow Systems CR920P & CR920XP -
-
DPM "Soft Captured" Recoil System for Glock 26 & 27 Gens 1-5
$111.59MSRP: $122.39DPM MRS-S Captured Soft Version for Glock 26 & 27 (Gen 1–5) – Optimized for Compensated / Suppressed Pistols & Light Ammo Engineered specifically for Glock 26 and Glock 27 Gen 1–5 pistols, the DPM... -
DPM Captured Recoil Reduction System for Walther PDP F-Series 4" Barrel
$105.99MSRP: $119.00DPM Captured Mechanical Recoil Reduction System for Walther PDP F-Series 4" Barrel Enhance the performance of your Walther PDP F-Series 4" barrel pistol with the DPM Captured Mechanical Recoil... -
DPM Recoil Spring Kit - Glock 17 Gen4 Captured SOFT
$111.59MSRP: $122.3917 Soft Version Gen 4 CAPTURED Low Pressure Ammo
Description
Product Overview
Optimize slide velocity and soften racking resistance on your slimline pistol with the DPM Captured Soft Mechanical Recoil Reduction System for Glock 43, 43X, and 48 (12.5 lb). Engineered specifically to solve cycling issues when running muzzle compensators, low-power target ammunition, or for shooters seeking an easier-to-rack slide, this dual-spring mechanical guide rod smoothly manages recoil energy without modifying your handgun's frame.
Featuring a 100% captured single-unit assembly for quick and hassle-free drop-in installation, this system delivers an effortless 8.8 lb idle weight in battery and ramps up progressively to 12.5 lb at full slide stroke. By cushioning violent frame-to-slide impact at the end of travel, it reduces muzzle rise, eliminates failure-to-eject (FTE) stovepipes on compensated setups, and protects internal components against long-term mechanical stress.
DISCLAIMER: "GLOCK" is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. or GLOCK Ges.m.b.H. This product is an aftermarket recoil system manufactured in Greece by DPM Systems Technologies and is not manufactured, authorized, endorsed, or warranted by GLOCK.
Key Features
- Tuned 12.5 lb Soft Rating: Softened spring resistance allows reliable cycling with compensators, ported slides, and light target loads.
- Easier Slide Racking: Light 8.8 lb battery position weight significantly reduces manual racking force for easier weapon manipulation.
- Fully Captured Dual-Spring Assembly: Single integrated unit keeps springs securely retained for quick, hassle-free drop-in field installation.
- Eliminates Cycling Jams: Restores proper timing to prevent short-stroking and failure-to-eject stovepipes on custom builds.
- Slide & Frame Cushioning: Mechanical progressive buffer prevents harsh frame battering at maximum slide extension.
- Slimline Compatibility: Direct replacement for factory guide rods on Glock 43, 43X, and 48 single-stack models.
- European Craftsmanship & Warranty: Made in Greece (EU) and backed by DPM Systems' unconditional lifetime warranty.
Specifications
| Brand / Manufacturer | DPM Systems Technologies |
|---|---|
| Product Line | Captured Mechanical Recoil Reduction System (Soft Version) |
| Firearm Compatibility | Glock 43, Glock 43X, & Glock 48 Handguns |
| Assembly Type | Fully Captured Dual-Spring Mechanical Guide Rod |
| In Battery Rating (Idle) | 8.8 lbs |
| Full Open Rating (Max Stroke) | 12.5 lbs |
| Target Applications | Compensated Slides, Low-Power Target Ammo, Easy-Racking Needs |
| Country of Origin & Warranty | Made in Greece (EU) | Manufacturer Lifetime Warranty |
Frequently Asked Questions
Why is this 12.5 lb "Soft" version recommended for compensated pistols?
Muzzle compensators bleed off expanding gas pressure to control muzzle rise, which reduces rearward slide momentum. Factory recoil springs are often too stiff for compensated setups, leading to short-stroking or stovepipes. The reduced 12.5 lb spring rating allows compensated slides to travel fully rearward for reliable extraction and feeding.
Does this DPM recoil system make the slide easier to rack manually?
Yes. Because the in-battery initial resistance is tuned to 8.8 lbs, manual manipulation and slide racking require noticeably less hand effort compared to stiff OEM dual recoil spring assemblies.
What does "Captured" design mean for this assembly?
A captured guide rod holds the springs, washer plates, and central shaft permanently assembled as a single self-contained unit. This eliminates loose spring components during field stripping and ensures quick, drop-in replacement without special tools.
Is this system compatible with standard double-stack G17 or G19 models?
No. This unit is dimensioned specifically for slimline single-stack and stack-and-a-half Glock models (G43, G43X, and G48). Standard double-stack models require dedicated DPM guide rod lengths.
