-
-
Calculated Kinetics Walther PDP 2.0 to RMR DogTag Plate
$58.99MSRP: $67.99Calculated Kinetics DOGTAG Optic Plate for Walther PDP 2.0 and F Series Terran Gear USA is proud to offer the Calculated Kinetics DOGTAG Optic Plate, a specialized mounting solution for the... -
Calculated Kinetics DogTag Plate fits Glock MOS Holosun 509T
$58.99MSRP: $64.99Calculated Kinetics DOGTAG Optic Plate for Glock MOS to Holosun 509T Terran Gear USA is proud to offer the Calculated Kinetics DOGTAG Optic Plate, a specialized mounting solution designed... -
Calculated Kinetics Walther PDP 2.0 to 509T DogTag Plate
$58.99MSRP: $67.99Calculated Kinetics DOGTAG Optic Plate for Walther PDP 2.0 and F Series, Holosun 509T When you transition to a high performance firearm like the Walther PDP 2.0 or the Walther F Series, the... -
Calculated Kinetics Walther PDP 2.0 to ACRO DogTag Plate
$58.99MSRP: $67.99Calculated Kinetics DOGTAG Optic Plate for Walther PDP 2.0 and F Series (Aimpoint ACRO) Terran Gear USA is proud to offer the Calculated Kinetics DOGTAG Optic Plate, a premium mounting solution...
Description
Product Overview
Upgrade your Smith & Wesson M&P 2.0 with the precision-engineered Calculated Kinetics Optic Plate for Trijicon RMR Footprint Optics at Terran Gear USA. Designed as a duty-grade replacement over standard factory plastic or thin metal plates, this mounting solution is precision-machined with ultra-tight tolerances to ensure a rock-solid lockup, preventing zero shift or sheared screws under heavy recoil.
Built with Calculated Kinetics' signature integrated deflection table, this plate features a contoured forward ledge that channels hot gases and unburned powder residue away from your optic's objective lens. By reducing carbon buildup on your glass by up to 75%, it keeps your sight picture crystal clear during high-volume training, home defense scenarios, or professional duty carry.
California Proposition 65 Warning: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Key Features
- 75% Reduced Carbon Buildup: Built-in deflection table acts as a gas shield, keeping lens glass clean during extended range sessions.
- 7075 Aluminum Construction: Machined from ultra-strong 7075-T6 billet aluminum with a hard-coat anodized finish for maximum corrosion and shock resistance.
- Precision Lockup & Tolerances: Tighter fitment than factory plates prevents red dot movement and protects mounting screws from shear stress.
- OEM Iron Sight Co-Witness: Delivers a clean lower 1/4th to 1/3rd co-witness sight picture when using OEM Optics Ready iron sights with most RMR footprint optics.
- Complete Installation Hardware: Comes complete with optic screws (blue & red bags), a Torx bit, Vibra-Tite threadlocker, and an installation card.
Specifications
| Brand / Manufacturer | Calculated Kinetics |
|---|---|
| Firearm Compatibility | S&W M&P 2.0, Compact, Full Size, Carry Comp, Competitor, Spec V Series (Optics Ready 2.0 Cut) |
| Optic Footprint Compatibility | Trijicon RMR / RMR Type 2 / RCR, Holosun 407C / 407Comp / 507C / 507Comp / 508T, Osight C / X |
| Material / Finish | 7075-T6 Billet Aluminum / Hard-Coat Anodized Black |
| Included Screws (Blue Bag) | 6-32 x 11.3mm (For Holosun & Osight) |
| Included Screws (Red Bag) | 6-32 x 0.5" (For Trijicon RMR) |
| Co-Witness Specs | OEM Optics Ready Sights: Lower 1/4th to 1/3rd (Note: Trijicon RCR requires taller XS R3D sights for lower 1/5th co-witness) |
Frequently Asked Questions
Will this plate fit the Smith & Wesson M&P Shield Plus?
No, this specific plate is designed for full-size and compact M&P 2.0 slide cuts. It is incompatible with the slimline Shield Plus footprint.
How does the integrated deflection table work?
The deflection table is a precision-machined ledge situated at the front of the plate that acts as a physical barrier, redirecting blast gases, heat, and carbon residue away from your front lens to reduce carbon buildup by up to 75%.
Does this plate co-witness with factory OEM Optics Ready iron sights?
Yes. Most standard RMR-footprint optics (such as the Trijicon RMR and Holosun 507C) will achieve a lower 1/4th to 1/3rd co-witness with factory Optics Ready iron sights. Note that the enclosed Trijicon RCR sits higher and will require XS R3D aftermarket sights for a lower 1/5th co-witness.
Do I need to purchase extra mounting screws or tools?
No, the kit supplied by Calculated Kinetics includes both 6-32 x 11.3mm screws (blue bag) and 6-32 x 0.5" screws (red bag), along with a Torx bit, Vibra-Tite threadlocker, and installation instructions.
